700 Series Cartridge Filter Housings

These cartridge-filter housings are designed to end the high cost of cartridge element change-out.  They are offered in single or multiple cartrdge configurations.  A single 700 series cartridge will out perform 40 standard wound 10" cartridges, thus reducing maintenance. A decrease in cartridge useage minimizes labor, operator exposure and disposal costs. A single 700 series cartidge holds as much as 20lbs of contaminant and allows flows to 100 gpm. 700 series cartridge elements are approximately 6.25 inches diameter and 35 inches in length.  They seal with a double o-ring nozzel end, and have a closed bottom cap making it easy to "plug in" for service.  There are no spring seals or v post to contend with. 

Standard Features of 700 Series Cartridge Filter Housings

• Low pressure drop

• Permanently piped housings are opened without disturbing the piping or requiring tools

• Quick-opening lids

• Carbon or stainless steel housings

• Serveral size holds 1 to 29 cartridge elements

• Cartridge options in 2 lengths: 35” or 40" 

• 150-psi rated housings

• 3/4-inch clean-dirty/gage ports

• Pipes sizes to 10"

• O-ring seals: Buna N, EPR, FKM

*Based on housing only. Fluid viscosity, filter cartridge used, and expected dirt loading should be considered when sizing a filter.